C2-2450A Edge Blender

The C2-2450A enables easy Edge Blending using 2 or more units. DVI and RGB inputs and outputs at virtually any resolution and refresh rate are supported. All settings are stored in non-volatile memory and are retained even when power is switched off. Ten user defined presets are also available to customize settings for various applications. All the functions can be controlled via the front panel Push Buttons, Infrared, RS-232 or IP. Windows Control Panel software is provided and most third party control systems interface directly with the entire C2 range of products. A front panel LCD makes setup easy. The unit is housed in a desktop case and an optional rackmount kit holds one or two units.

Specifications:

Computer Inputs
Signal Type: 1x DVI-D via DVI-I Connector - 1x Analog via HD-15 Female
Format: RGBHV, RGBS, RGsB, YPbPr
Sync: TTL Level, 10K, Pos or Neg
Termination: 75
R-G-B Level Range: 0.5-2.0 Vp-p
Scan Rate: Detection Automatic
PC Resolutions: DVI up to 1920x1200 60Hz - Analog up to 2048x2048
HDTV Resolutions: Any up to 1080p/60
Max Horiz Scan Rate: 150KHz
Computer Compatibility: PC, Macintosh, Workstations

Computer Outputs
Signal Type: 1x DVI-I via DVI-I Connector - 1x Analog via HD-15 Connector
Format: RGBHV, RGBS, RGsB, YPbPr
R-G-B Level: 0.7 Vp-p
Analog Signals: PC to 2048x2048,HD to 1080p/60
DVI Signals: PC to 1920x1200,HD to 1080p/60
Vertical Refresh Rate: Any to 250Hz

Control Methods
Local: via Front Panel Buttons & OSD
RS-232 Interface: via D9 Female Connector
IP Interface: via RJ45 Connector
Infrared Remote: via optional IRC-5 Remote Unit
Input Expansion: Control via D-15 Options Connector